DWDM Advance – Advanced Training

Learning Objectives:

• DWDM Advance Anatomy
• DWDM Advance Impairments
• Multiwavelength Transmitters
• Multichannel Receivers
• DWDM Advance Optical Amplifiers
• Wavelength Converters
• Modal Effects
• Scattering Effects
• Miscellaneous Effects

Learning Objectives:

• Spectrum
• Availability, Occupancy, Efficiency
• Bandwidth & Distance Limitations
• Noise, Dispersion, Non-linearities
• Four Wave Mixing (FWM)
• Cross-phase Modulation (XPM)
• Stimulated Brillouin Scattering (SBS)
• Stimulated Raman Scattering (SRS)
• Chromatic Dispersion (CD)
• Polarization Mode Dispersion (PMD)
• Amplified Spontaneous Emission (ASE)
• Modeling of Nonlinearities
• Noise-like penalties
• Illustrations with System Examples
• Optical Power Damage Threshold
• Fiber
• Components
• Noise Sources: ASE, Shot, Thermal, etc.
• Not-Return-to-Zero (NRZ) vs. Return-to-Zero (RZ) Transmission
• Dispersion and PMD Compensation
• The Effects of Optical Crosstalk

Learning Objectives:

• Parameters common to all optical components
• Optical Filters
• Optical Couplers
• Optical Power Attenuators
• Polarizer and Rotators
• Beam Splitters
• Optical Isolators and Circulators
• Optical Multiplexers and Demultiplexers
• Optical Cross Connects (OCXs)
• Optical Add Drop Multiplexers
• Optical Equalizers
• Light Sources
• Laser Beams
• Modulators
• Photodetectors and Receivers
• Optical Amplifiers
• Wavelength Convertors
• Optical Phase-Locked Loops
• Ring Resonators
• Optical Attenuators
• Optical SNR

Learning Objectives:

• Advantages
• EDFA Disadvantages
• Limited to C and L bands
• Pump Laser
• Erbium Doped Fiber
• Wavelength Selective Coupler
• Isolator
• A Comparison between EDFE, Raman Amplifier and SOAs

Learning Objectives:

• Optical Systems and Components Analysis
• Optical Transmitters: Lasers
• Modulation: Direct and External
• Optical Receivers: Photodetecters
• Couplers and Circulators
• Cavities and Filter
• Complex Components: Transponders
• Optical Switches
• Mechanical Switches
• Acousto-Optical Switches
• Micro-mechanical switches (MEMS)
• 2D MEMS (Bar State)
• 3D MEMS Switch Operation
• Electro-Optical and Thermo-Optical Switches
• Bubble Technology
• Liquid Crystal Switches
• Hologram-based Switches
• Factors That Affect System Design
• Effect of Chromatic Dispersion
• Q-Factor and OSNR
• What is the Q-factor?
• Methods to determine the Q-factor
• Asynchronous sampling (voltage histogram)
• Synchronous sampling (digital sampling scope)
• Synchronous sampling method (single decision threshold method)
• Synchronous sampling method (dual decision threshold method)
• Q-factor applications
• System test during manufacturing
• Installation of optical networks
• System optimization
• Maintenance and troubleshooting
• System monitoring
• Calculation of Q-Factor from OSNR
• Margin Requirements
• Design Using Chromatic Dispersion Compensation
• OSNR and Dispersion-Based Design
• Effects of FWM and XPM on Long-Haul Design
• PMD in Long-Haul Design
• Forward Error Correction (FEC)

Learning Objectives:

• Engineering a DWDM Advance link
• Power Budget Design
• What are the factors?
• Digital Modulation Formats
• Fiber Impairments
• Loss
• Dispersion
• Nonlinear Effects (SPM, XPM, FWM, Raman)
• Polarization Dependent Effects (PDL and PMD)
• Noise Sources and Noise Accumulation
• Bit Error Rate and Signal-to-Noise-Ratio
• Signal Crosstalk
• DWDM Advance Systems Design Amplifier power
• Amplifier spacing
• Fiber types
• Channel count and bit rate
• Channel Bit Rate
• Dispersion and polarization
• Non-linear effects
• Simulation and testing

Learning Objectives:

• Test and Measuring Devices
• Characterization of a DWDM Advance Mux and Demux
• Characterization of a DWDM Advance OADM
• EDFA Testing
• Optical Waveform Analysis
• Complete DWDM Advance End-to-End
• Component conformance tests
• Parameter tests on optical fibers
• System installation tests
• System optimization tests
• System acceptance tests

You can enroll for this classroom training online. Payments can be made using any of the following options and receipt of the same will be issued to the candidate automatically via email.
1. Online ,By deposit the mildain bank account
2. Pay by cash team training center location

Highly qualified and certified instructors with 20+ years of experience deliver more than 200+ classroom training.

Contact us using the form on the right of any page on the mildaintrainings website, or select the Live Chat link. Our customer service representatives will be able to give you more details.

You will never miss a lecture at Mildaintrainigs! You can choose either of the two options: View the recorded session of the class available in your LMS. You can attend the missed session, in any other live batch.

We have a limited number of participants in a live session to maintain the Quality Standards. So, unfortunately, participation in a live class without enrollment is not possible. However, you can go through the sample class recording and it would give you a clear insight about how are the classes conducted, quality of instructors and the level of interaction in a class.

Yes, you can cancel your enrollment if necessary prior to 3rd session i.e first two sessions will be for your evaluation. We will refund the full amount without deducting any fee for more details check our Refund Policy

Yes, the access to the course material will be available for lifetime once you have enrolled into the course.

Just give us a CALL at +91 8447121833 OR email at info@mildaintrainings.com